41
Step 5: Configure NAT settings. If you are unsure about the options, please keep the default settings and then click Next.
Step 6: To configure the Default Gateway interface, select the interface that you want to configure with the WAN
gateway address in Available Routed WAN Interfaces box and move it into Selected Default Gateway Interfaces box.
Then click Next.
Step 7: To configure the WAN DNS address, check the Obtain IPv6 DNS info from a WAN interface option, or select
the Use the following Static IPv6 DNS address option to enter the static DNS server IPv6 addresses provided by your
ISP. At last, click Next.
To Next Page
Loading...
