3. Configure the internet access
Step 1: Log in to the web UI
Router mode
➊ Use an Ethernet cable to connect a LAN port of the ONT to a wired
device, such as a computer.
➋ Start a web browser on the computer and visit 192.168.1.1.
➌ Enter the User Name and Password (admin for both by default).
➍ Click Login.
ONT
- PPPoE is used for illustration here. Change the parameters as
required by your ISP.
- Choose a desired mode to configure your internet access:
Router mode: Configure the internet on the ONT.
Bridge mode: Dial-up on a router or terminal.
Tips
PWR PON LOS LAN
PON LAN
RST
PWR
Power
source
WAN
WAN
LAN
1 2 LAN
Ethernet cable
LAN
Internet
Computer
Ethernet cable
Optical fiber
To Next Page
Loading...
