Q4: How to reset the ONT?
A4: Method1: After the ONT completes startup, use an object with a spike to hold down the RESET
button for 10 or more seconds and release it. All LED indicators light off in a few seconds.
When the PWR LED indicator lights solid on again, the ONT is reset.
Method2: Log in to the web UI of the ONT, choose Admin > Backup/Restore and click Reset on
the page.
Q5: How to change the Wi-Fi name and Wi-Fi password?
A5: Log in to the web UI of the ONT, and choose WLAN:
Wi-Fi name: Choose Basic Settings and change the SSID (Wi-Fi name). Click Apply Changes,
and click OK when Change setting successfully is shown.
Wi-Fi password: Choose Security, set Encryption to WPA2 Mixed (recommended) and
change the Pre-Shared Key (Wi-Fi password). Click Apply Changes, and click OK when
Change setting successfully is shown.
10
To Next Page
Loading...
