N3 11N Wireless Broadband
Router User Manual
performance with some specific websites or application software that
cannot be opened or enabled.
3. Dynamic IP (DHCP)
Select this option if your ISP does not give you any IP information or
account information. You don’t need to configure any settings for this
connection.
PPTP:
● Mode: Displays the current Internet connection type.
● PPTP Server address: Enter the IP address of a PPTP server.
● Username/Password: Enter Username/Password given by the PPTP
server.
● MTU: Maximum Transmission Unit. DO NOT change factory default
value unless necessary. However you may need to change it for optimal
performance with some specific websites or application software that
cannot be opened or enabled; in this case, try 1450, 1400, etc.
23
To Next Page
Loading...
