N3 11N Wireless Broadband
Router User Manual
● Address mode: Select “Dynamic” if you don’t get any IP information
from the PPTP server, otherwise select “Static”.
● IP address: Enter the IP address information provided by your ISP
(PPTP server). Inquire your local ISP if you are not clear (Static IP
address mode only).
● Subnet mask: Enter the subnet mask provided by your ISP, normally,
255.255.255.0 (Static IP address mode only).
● Gateway: Enter the gateway provided by your ISP (Static IP address
mode only). Inquire your local ISP if you are not clear.
L2TP
● Mode: Displays the current Internet connection type.
● L2TP Server address: Enter the IP address of a L2TP server.
● Username/Password: Enter Username/Password specified by the
PPTP server.
● Address mode: Enter the IP address information provided by your ISP
(PPTP server). Inquire your local ISP if you are not clear (Static IP
address mode only).
● IP address: Enter the IP address information provided by your ISP
(PPTP server). Inquire your local ISP if you are not clear (Static IP
address mode only).
● Subnet mask: Enter the subnet mask provided by your ISP, normally,
24
To Next Page
Loading...
