Tenda O1

101
----End
Parameters description
Name
Description
Enable Wireless
It specifies whether to enable the wireless function. By default, it is enabled.
Country/Region
It specifies country or region where this device is located. You can select the country
or region to ensure that this device complies with the channel regulations of the
country or region.
SSID
It specifies the wireless network name.
Broadcast SSID
It specifies whether to broadcast the SSID.
When the device broadcasts an SSID, wireless clients can detect the SSID. When this
parameter is set to Disable, the device does not broadcast the SSID and nearby
wireless clients cannot detect the SSID. In this case, you need to enter the SSID
*
*
*