IB 9008460 (08- 2015) 1
INSTRUCTION BULLETIN
No. 9008460
Machine: T16
Published: 08- 2015
Rev. 02
NOTE: DO NOT DISCARD the Parts List from the Instruction Bulletin. Place the
Parts List in the appropriate place in the machine manual for future
reference. Retaining the Parts List will make it easier to reorder
individual p arts and will save th e cost of ordering an entire kit.
NOTE: Numbers in parenthesis ( ) are reference numbers for parts listed in Bill of Materials.
Installation instructions for kit number 9008139
SYNOPSIS:
This kit contains the parts needed to install a strobe light / backup alarm kit on T16 machines.
Please follow step-by-step instructions.
SPECIAL TOOLS / CONSIDERATIONS: NONE
(Estimated time to complete: 1.5 hours)
PROTECT THE ENVIRONMENT
Please dispose of packaging mat erials , used machine component s
such as bat t er ies and f luids in an envir onment ally saf e way according
to local was t e disposal regulat ions.
Always remember to recycle.
PREPARATIO N:
1. Park the machine on a clean level surface,
turn off the machine, and remove the key.
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off
machine, and remove key.
2. Disconnect the battery cables from the
batteries.
W ARNING: Always disconnect battery
cables from machine before working on
electrical components.
INSTALLATION:
1. Remove the plugs from the recovery tank
cover and discard both plugs. (Fig. 1)
FIG. 1
2. Completely open the recovery tank cover and
lock the cover open.
To Next Page
Need help?
General
