To Next Page
A
Alfred HarrisAug 12, 2025
Why is there trailing water with poor pickup from my Tennant Scrubber?
- KKristin HooverAug 12, 2025
There are several possible causes for trailing water with poor pickup: * The scrub vacuum fan may be turned off, so turn it on. * The squeegee blades may be worn, so rotate or replace them. * The squeegee may be out of adjustment, so adjust it. * There may be no detergent in the solution tank, so add detergent. * The vacuum hose may be clogged, so flush it. * The vacuum screen may be dirty, so clean it. * The recovery tank cover seals may be worn, so replace them. * There may be debris caught in the squeegee, so remove it. * The vacuum hose to the squeegee or recovery tank may be disconnected or damaged, so reconnect or replace it. * The recovery tank cover may not be completely closed, so check for obstructions and ensure it's closed properly.
General
