To Next Page
B
Brandon TurnerSep 6, 2025
Why Tennant T581 Scrubber does not clean uniformly?
- RRyan WilliamsonSep 6, 2025
If your Tennant Scrubber isn't cleaning uniformly, the brush or disks might be worn and need replacement.
Why Tennant T581 Scrubber does not clean uniformly?
If your Tennant Scrubber isn't cleaning uniformly, the brush or disks might be worn and need replacement.
What to do if Tennant T581 Scrubber does not brake?
If your Tennant Scrubber machine doesn't brake, check if the electromagnetic brake is disengaged.
What to do if the suction motor does not start in my Tennant Scrubber?
If the Tennant Scrubber's suction motor isn't starting, there are several potential causes: * The dirty water tank might be full, in which case you should empty it. * A fuse may have blown, requiring a replacement. * The switch could be faulty and need replacing. * The motor itself might be damaged, also requiring replacement. * A wire may have detached, so check the wiring. * The batteries may need recharging.
Why are the brushes not turning on my Tennant Scrubber?
If the Tennant Scrubber brushes aren't turning, consider these possible causes and solutions: * The dirty water tank may be full; empty it. * A fuse might be blown; replace it. * The switch could be faulty; replace it. * The motor may be damaged; replace it. * A wire might be detached; check it. * The batteries may need recharging.
How to troubleshoot a Tennant Scrubber that does not work?
If your Tennant Scrubber isn't working, start by checking these items: * Ensure the batteries are properly connected to the machine. If disconnected, connect them. * Recharge the batteries. * Make sure the battery disconnect lever is in the correct position. If pressed, return it to its normal position.
Details on brush motors, including current draw, thermal protection, and replacement.
Step-by-step instructions for safely removing the brush head assembly.
Information on the brush head actuator, its checks, and replacement.
Covers suction motors, current draw, carbon brushes, and disassembly.
Details the squeegee actuator and its adjustment.
Information on solenoid valve, filters, and tank level sensors.
Procedures for checking and replacing solution and dirty water tank floats.
Information on Curtis and Italsea drive circuit boards.
Covers drive motor checks, electric brake, carbon brushes, and wheel replacement.
Details on the accelerator pedal, its checks, and replacement.
Information on the instrument panel, programming, and firmware updates.
Details on the functions board, its connections, and dismantling.
Wiring schematics for single and double disc versions.
Lists alarms on the instrument panel, their causes, and remedies.
Lists alarms on the drive board, their causes, and remedies.
Common machine problems, their causes, and recommended solutions.
General
