▪ If you feel the brakes are obviously loose, but the wear degree of
brake blocks is still acceptable, and there is no sign of oil leakage
on the brakes, contact a professional store and ask technicians to
replenish the lubricant.
▪ Contact a professional bike store and ask technicians to diagnose
after you have cleaned any oil from the brake blocks and discs.
Professional store maintenance
We recommend that you go to a professional store for maintenance
23 times a quarter or after every 1,000 km of riding distance. The
following items should be checked during such maintenance:
▪ The performance of the hydraulic brakes
▪ The fastening performance of screws in key parts, especially
those between the discs and bottom brackets
▪ The wear degree of the front fork parts
▪ The wear degree of the front hub bearings
▪ The wear degree of the pedal pivots
▪ The smoothness of pivots in the front fork parts, front hub bearings,
bottom bracket, pedals, and other parts lubricate the internal
pivots in a professional store
▪ The wear degree of the tires
▪ The fastening performance of the bottom bracket torque sensor,
battery, controller, motor, odometer, and other electronic control parts
The frame code, which is in the form of a QR code, can be found
near the bottom bracket at the bottom of the down tube. You can
scan the QR code with your phone to see the 18-digit frame code.
This frame code can also be used for purchasing insurance.
Provide
your frame code information when contacting us for consultation.
043 Routine maintenance
04.
ROUTINE
MAINTENANCE
To Next Page
Loading...
