Teradek COLR - Physical

6 | P a g e
 HDMI output is 8-bit RGB 4:4:4
 SDI input/output is 10-bit YCrCb 4:2:2
PHYSICAL
 Dimensions: 2"W x 1"D x 4"H
 Weight: 6oz
VIDEO PROCESSING
 CDL/1024 1D LUT (supports 10-bit color)
 33x33x33 3D LUT (supports 10-bit color)
 HDMI/SDI cross conversion
PROTOCOL SUPPORT
 Network Protocols: TCP/IP, UDP, HTTP, DHCP, MDNS/Bonjour
USER INTERFACES
 WebUI for look management, camera control, network configuration
 OLED LCD Display with joystick navigation buttons
 Integration with Pomfort LiveGrade
NETWORK
 Ethernet: 10/100/1000BASE-T
 WiFi: 2.4/5GHz 802.11 ac/a/b/g/n MiMO
 Mini-B USB
POWER
 2 Pin Lemo Power input
 Nominal Power Consumption: 5W - 8W
 Auxiliary Power Input: 6-28V DC
GETTING STARTED
POWER & VIDEO
1. Connect power to COLR using the included A/C adapter.
2. Connect the SDI or HDMI output from your video source to one of COLR’s video input connectors. Connect the SD/HD/3G-SDI or
HDMI output to your monitor. Both HDMI and SDI outputs are active regardless of the input signal.
CONNECT TO COLR
COLR has a built in web interface for managing color presets and device settings. Access the interface via Wi-Fi, Ethernet, or a direct
USB connection.