Need help?Do you have a question about the Teradek LINK Pro and is the answer not in the manual?
Explains the status and function of LEDs on the Link Pro device.
Details the physical ports, indicators, and mounting points of the Node device.
Details how to power the Link Pro backpack and connect its components.
Outlines the steps for assembling and powering the Link Pro Radome unit.
Guides users through the initial assembly and powering of the Link Pro.
Explains the procedure to restore the Link Pro to its original factory settings.
Details the process of connecting to the Link Pro network using Wi-Fi.
Explains how to connect to the Link Pro using an Ethernet cable.
Guides users on assembling and powering the Teradek Node device.
Details the steps to configure the Link Pro's connection with a Teradek Core account.
Describes how to access and view network data and connection statistics via the Core dashboard.
Explains how to configure Wi-Fi channel, mode, SSID, and security options.
Details IP address, DHCP server, and other LAN settings for the Link Pro.
Covers advanced WAN options for establishing Internet connectivity via cable/DSL.
Details how to power the Link Pro backpack and connect its components.
Outlines the steps for assembling and powering the Link Pro Radome unit.
Lists the network protocols and bonding capabilities supported by the Link Pro.
Provides dimensions, weight, and construction materials of the Link Pro.
Details HTTP, switches, expansion ports, and status LEDs on the Link Pro.
Outlines Ethernet, Modem, Wireless (WiFi), and Encryption specifications.
Specifies power input, battery type, PoE, consumption, and battery plates.
Lists operating and storage temperature and humidity ranges.
Covers mounting options for the Link Pro device.
Provides dimensions, weight, and construction materials of the Node.
Details LTE, UMTS, RF bands, power class, data rate, and SIM type for the Node.
Specifies power input, battery type, nominal power consumption, and interface LEDs.
Lists operating and storage temperature and humidity ranges for the Node.
Covers mounting options for the Node device.
General| Wireless Standard | 802.11ac |
|---|---|
| Frequency Bands | 2.4 GHz, 5 GHz |
| Antenna Connectors | 2 x RP-SMA |
| Ethernet Ports | 1 x Gigabit Ethernet |
| Channel Bandwidth | 20/40/80 MHz |
| Operating Range | 1000 ft |
| MIMO | 2x2 |
| Operating Temperature | 0 to 40° C |
| Encryption | WPA2 |
| Power Input | 11-24V DC |
To Next Page
