Chapter 1
D8M Development Kit
erasic D8M is an 8 Mega Pixel Digital Camera Development Package. The user can
connect this camera module onto the FPGA development kit via the 2x20 Pin GPIO
connector for image capturing, image processing & image output.
The D8M provides the Camera Module with the high speed MIPI interface, which also
supports the simple 10Bit Parallel Bayer Pattern Data solution after the MIPI Decoder
conversion. It is able to control the D8M module by FPGA via I2C interface for output
resolution, ALBC, Frame rate, etc. The D8M also features an Auto-focus function.
We do provide demo source codes for the D8M working with different FPGA
development kits. These demos are created by using RTL & ALTERA VIP, By referring
these demos, the user can quickly learn how to work with this D8M on his/her own
application.
1.1 Package Contents
Figure 1-1 The D8M package contents
The D8M package includes:
⚫ Product Box
To Next Page
Loading...