During this phase, the system performs the self test and automatically puts itself in shut
off condition. If the machine operating mode is correct, please confirm by pressing the
red button.
If the operator needs to change the operating mode, please refer to the instruction
reported on page 16 “HOW TO SELECT THE OPERATING MODE”
10
What does it happen when starting the machine?
The system gets activated and automatically proceeds to its
self test mode giving information to the Operator
.
Starting the system the display shows the last operating mode setted prior to the system
switching off.
SWITCHING THE MACHINE ON
SWITCHING THE MACHINE ON
m
m
ma x
RUN
0°
12.3
13.4
.2
9.2
24°
m
m
t
MAIN BO OM 4 SEC.
01 4 .0 0 5.7
To Next Page
Loading...
