m
m
%
21
Working Area Limiting Link: (option)
Working Area Limiting Link: (option)
i.s.a.a.c.
(interactive space advanced automatic control)
1
2
Appendix
Welcome to ISAAC. The 3B6 working area limiting system.
Isaac is a graphic interface, which helps the operator set restricted working area limits for
the machine. Working area limits are set by means of a self learning procedure using text
and graphic symbols.
In the upper part of the display, graphic information (1) will be indicated, in the lower part
of the display, 3 icons represent the actual function of the 3 input buttons (2).
The pushbuttons are multi-function, depending on the page of the interactive menu.
to confirm and store the actual turret position.
erase previous stored values. This button also restores full machine operations.
access to next page within isaac
return to main system menu
MEGAMAC HC is equipped with Working area limitation software. To access “isaac”
menu, press and release the green pushbutton button until the following page is shown.
T
T
To Next Page
Loading...
