m
m
%
MAX Radius setting:
Press and release the red pushbutton to access the following menu:
1) Graphic zone: the black area indicates the restricted working area (non-working area
for the boom). Blinking arrow indicates the limited movement
2) Actual radius (meters, 1 decimal.) (feet/tenths)
3) Push button function
4) Text line: it indicates the actual stored allowed radius. (999 means no limitation)
5) Actual radius (meters, 1 decimal) (feet/tenths)
6) Boom height (meters, 1 decimal) (feet/tenths)
7) Radius (meters, 1 decimal) (feet/tenths)
8) Warning: it is activated when the boom reaches the maximum allowed radius. When
the maximum radius is reached, the movement is automatically stopped and the red
light is illuminated at the same time with the “STOP” symbol
How to store max angle:
• Raise or lower the boom to the required maximum position.
• Press and release the green pushbutton .
• In the text line [4] you will see the blocking radius value in meters and one
decimal.
• To cancel the stored value, press and release the yellow pushbutton ,
the value in the line [4] will be set to 9999 (no radius limit).
Working Area Limiting Link: (option)
Working Area Limiting Link: (option)
i.s.a.a.c. (interactive space advanced automatic control)
1
2
4
3
8
76
5
24
Appendix
T
To Next Page
Loading...
