Need help?Do you have a question about the Terex Genie SX-125 XC and is the answer not in the manual?
General| Turntable Rotation / Swing | 360° continuous |
|---|---|
| Platform Rotation | 160° |
| Jib Vertical Range | 135° |
| Gradeability | 45% |
| Power Source | Diesel |
| Fuel Type | Diesel |
| Overall Length | 43 ft 8 in |
| Stowed Length | 43 ft 8 in |
| Overall Height | 10 ft |
| Stowed Height | 10 ft |
| Jib Length | 8 ft |
| Turning Radius (Inside) | 10 ft |
| Controls | Proportional |
| Engine Type | Deutz TD2.9 L4 |
| Engine Power | 74 hp |
| Overall Width / Machine Width | 2.44 m |
Details the manual's purpose, scope, and machine identification methods.
Explains machine movements, controls, and operational limitations.
Defines hazard symbols, signal words, and safety sign maintenance.
Covers general safety precautions and hazard identification labels on the machine.
Focuses on personal fall protection requirements and usage.
Covers electrical, tip-over, fall, collision, fire, and battery hazards.
Safety guidelines for contact alarms, pipe cradles, and welders.
Identifies numbered components of the machine shown in diagrams.
Illustrates and describes controls on ground and platform panels.
Guides for pre-operation, function, system, and workplace inspections.
Covers engine start, emergency stop, driving, steering, and slope operations.
Explains how platform load affects motion and tilt sensor settings.
Details LCD screen info, engine regeneration, and pipe cradle use.
Guidelines for safely transporting and securing the machine.
Instructions for properly lifting the machine using designated points.
Covers fluid checks, fuel requirements, and scheduled maintenance.
Provides detailed technical specifications for the machine models.
Graphical representation of the machine's operational range.
Details the machine's compliance with relevant EC directives.
To Next Page
