Terex GS32MT-101 Maintenance Manual

Maintenance Manual November 2021
Programmed Maintenance Procedures
88 Scissor Lifts Part No. 1305686GT
P5-1
Perform Engine Maintenance –
5000 Hours
Engine specifications require that this procedure
be performed every 5000 hours.
Required maintenance procedures and additional
engine information are available in the
manufacturer's manuals. Refer to Specifications,
Engine Operator and Maintenance Manuals.
Deutz Models
D 2.9 L4, TD 2.2 L3
• Engine overhaul
P6-1
Perform Engine Maintenance –
6000 Hours
Engine specifications require that this procedure
be performed every 6000 hours.
Required maintenance procedures and additional
engine information are available in the
manufacturer's manuals. Refer to Specifications,
Engine Operator and Maintenance Manuals.
Deutz Models
D2011L03i
• Toothed belt - replace
Scissor Lifts
Part No. 130 568 6G T
Maint enan ce M anu al
Novem ber 2021
Maint enan ce In spec ti on Re por t
– Sciss or Li f ts

Terex GS32MT-101 Specifications

General

Brand	Terex
Model	GS32MT-101
Category	Lifting Systems
Language	English