First Edition • Third Printing Operator's Manual
Operating Instructions
Part No. 1308591GT GS
™
-1432m • GS
™
-1932m • GS
™
-1932m Lite 51
Lift Tools Work Tray Instructions
The Lift Tools Work Tray assembly consists of one
tray and two mounting brackets with hardware.
1 bolt, 1/4-20 x 0.75"
2 rubber bumper
3 lift tool work tray
4 tool tray bracket
5 decal, warning
Observe and Obey: Lift Tools
Work Tray Installation
Lift Tools Work Tray must be installed on the
inside of the platform.
Only one Lift Tools Work Tray can be used per
machine.
Mount Lift Tools Work Tray on the Extension
Deck rail on the opposite side of the PCON.
Lift Tools Work Tray can be on either upper or
lower rail.
Be sure the Lift Tools Work Tray is secured to
the platform.
Lift Tools Work Tray lanyard is for tools only.
Do not attach personal safety lanyard.
Lift Tools Work Tray Installation
1 Tighten the four 1/4-20 x 0.75 bolts (1).
To Next Page
Loading...
