2-9
Operating
* Ensure all cab glass, mirrors and light lenses are clean during vehicle
operation for maximum visibility.
* Always keep cab floor clear of anything that could restrict full operation of
pedals.
* Always make sure all gauges, warning/indicator lights and controls are
working properly before operating vehicle.
* Always perform 'Pre-Operating Checks' described on page 4-9 to ensure the
vehicle is ready for operating.
* Always wear seat belts when operating the vehicle.
* In the event of a loss of steering system supply pressure, a red warning light
on the instrument panel will illuminate. If this light illuminates, indicating a loss
of steering power, the vehicle must be stopped immediately and no further
operation attempted until the fault is corrected.
* Do not operate if exposed personnel enter the immediate work area.
* Sound horn before starting engine or beginning to move vehicle; two blasts
for forward and three blasts for reverse.
* Watch for ground crew and other personnel on foot. Sound horn as a warning
before setting vehicle in motion and when approaching ground crew.
* Be sure the body is fully down before moving the vehicle.
* Always try to face or look in the direction the vehicle is travelling.
Courtesy of Machine.Market
To Next Page
Loading...
Need help?
General
