Terex TA40 User Manual

4-15
0
5
10
15
20
25
RPM x100
30
N
Stopping the Engine
1. Make sure parking-emergency
brake control is in the 'PARK' position.
2. Make sure the transmission is in
'NEUTRAL'.
3. Allow the engine to run between idle
and 1 000 rev/min with no load for 4 or 5
minutes. This allows the engine to cool
and the turbocharger to slow down.
Shutdown the engine.
Note: Stopping a turbocharged engine
immediately after high speed operation
may cause damage to the turbocharger
as it will continue to turn without an oil
supply to the bearings.
4. Turn ignition key switch to the 'OFF'
position. This cuts off the power supply
to the DDEC system which in turn
shuts down the engine.
5. Make sure body control lever is in the
'FLOAT' position.
6. Turn battery master switch 'OFF'.
1091
5
4
281
1141
1157
36
1
1461
1233
2
Courtesy of Machine.Market

Terex TA40 Specifications

General

Brand	Terex
Model	TA40
Category	Trucks
Language	English