Terex TA40 User Manual

4-7
N
Starting the Engine
Attention to the warning lights and
instruments when starting the engine,
and operating, will help the operator
monitor the vehicle systems and
components.
1. Make sure park-emergency brake
control is in the 'PARK' position.
2. Turn master switch to 'ON' position.
3. Make sure the body control lever is
in the 'FLOAT' position.
4. Make sure the transmission gear
shift control is in the 'NEUTRAL'
position.
5. Insert switch key and turn clockwise
to position '1' to switch on the ignition.
Press warning light test switch to test
operation of warning lights.
6. Press horn control to sound horn.
Note: Always sound horn before
starting engine or operating any
control.
1140
1461
1091
2
3
314
6
575
5
1
1233
4
Courtesy of Machine.Market

Terex TA40 Specifications

General

Brand	Terex
Model	TA40
Category	Trucks
Language	English