94
Operating Instructions Wheel Loader TL120
Care and Maintenance7
7.8.15.2 Removing the battery
• First disconnect the battery ground cable (-) and
then the positive cable (+).
• Slacken clamping bracket (64/1).
• Lift out the battery.
7.8.15.3 Installing the battery
• Place the battery in the machine.
• Secure with the clamping bracket.
• Connect first the positive battery cable, then the
ground cable.
7.8.15.4 Checking lighting and warning
equipment
• Check the function of the lighting equipment.
• Check the function of the indicator lamps.
• Check the function of the warning equipment.
7.8.16 Cab ventilation dust filter
The air intake for the heater and fresh air supply of the
cab features a dust filter, optionally a charcoal/ pollen
filter.
Fig. 64 Removing and installing the battery
Machine damage
due to interchange of terminals.
• Ensure that the negative terminal is
connected to the negative pole (–) and the
positive terminal to the positive pole (+).
Attention
Note that the battery charge should be
closely monitored particularly in winter.
To Next Page
Loading...
