Care and Maintenance 7
63/112TL160
Operating Manual 12.9.08 Version 1.0
7 Care and Maintenance
The good operating condition and life expectancy of
machines are largely influenced by care and
maintenance.
For this reason, it is in every machine owner’s interest
to perform the specified maintenance work and
comply with the service intervals. This Chapter deals
in detail with periodic maintenance, inspection and
lubricating tasks.
The type-specific maintenance and inspection plan
lists all work to be performed on the machine at
regular intervals. Maintenance and inspection plans
for this purpose are contained in every Instruction
Book.
It is essential that the recommendations in the
Chapter "Safety and Prevention of Accidents" are
observed (Î 2, 13).
7.1 Intervals
Initial inspection once before first putting into operation Î 7.7.1, 68
Daily tasks Every 10 operating hours or every work shift
1
Î 7.7.2, 70
Weekly tasks Weekly or after 50 operating hours
1
Î 7.7.2, 70
100 operating hours once after first putting into operation
2
Î 7.7.4, 74
Every 500 operating hours After every 500 operating hours or 6 months Î 7.7.4, 74
Every 1000 operating hours After every 1000 operating hours or 12 months Î 7.7.4, 74
Every 2000 operating hours After every 2000 operating hours or after 2 years Î 7.7.4, 74
Tab. 22 Intervals
1
whichever comes first
2
also applicable if new or overhauled diesel engines are put into operation.
To Next Page
Loading...
