Care and Maintenance 7
73/112TL160
Operating Manual 12.9.08 Version 1.0
• Grease all lubricating points with multi-purpose
grease.
Attention
The intervals stated are valid for single-shift
operation.
• Shorten the lubrication intervals for special
operations, e.g. on sandy ground in order
to achieve self-cleaning of the bearing
points.
Item Lubricating point Number Daily Weekly Chapter
1 Tilt cylinder – Tilt control lever 1 X --
2 Lift frame – Tilt control lever 1 X --
3 Lift cylinder – Lift frame 2 X --
4 Tilt cylinder – Front-end 1 X --
5 Lift frame – Front-end 2 X --
6 Lift cylinder – Front-end 2 X --
7 Lift frame – Quick-attach system 2 X --
8 Linkage – Quick-attach system 2 X --
9 Tilt control lever – Linkage 1 X --
10 Hydr. quick-mount hitch 2 X --
11 Steering cylinder – Front-end 2 X --
12 Articulation 3 X --
13 Steering cylinder – Rear-end 2 X --
14 Rear axle bearing 2 X --
Tab. 28 Lubricating points
To Next Page
Loading...
