Care and Maintenance 7
83/112TL160
Operating Manual 12.9.08 Version 1.0
7.8.5.5 Draining the fuel tank and cleaning the
screen
• Drain water from the fuel tank through the water-
drain plug (53/1).
• Clean the filling screen (53/2) and check for
damage; replace if required.
7.8.6 Air filter, air intake
7.8.6.1 Cleaning the dust ejection valve
The dust ejection valve (54/1) is largely maintenance-
free.
• Any baked-on dust can be removed by squeezing
the valve together.
7.8.6.2 Cleaning or replacing the air intake
• Check the air filter attachment and retaining straps
for damage.
• Check the tightness of the air intake between the
air filter and the engine.
• Examine rubber parts for damage and replace if
necessary.
Fig. 53 Draining the fuel tank and cleaning the screen
Machine damage
due to dust being drawn into the engine.
• All work on the air intake system must be
carried out with the engine off.
• Do not start the engine while the filter
cartridge is removed.
Fig. 54 Cleaning the dust ejection valve
L854-42
1
Attention
• Replace damaged parts immediately!
To Next Page
Loading...
