23
When disconnecting the cable always take hold of the plug.
Pulling on the cable may cause damage to the wires, fire or electric shock.
No tests should be performed while charging the device; doing so may distort test results.
3.11 USB Cable Port
The testing computer is equipped with a USB cable port on the partition panel of the storage box. This USB
port provides service access for the manufacturer, and can also be used by the operator to transfer test data
from the internal memory to a computer via a standard USB2.0-A/A-m/m cable (see also section 6.4.2 of
this manual).
To Next Page
Loading...
