EasyManua.ls Logo

Terri 2040 - Light Switch

Default Icon
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
20 Warning light for low hydraulic oil level
When the hydraulic oil level drops to the minimum level, the
warning light shines.
21 Warning light fordifferential lock
The indicator shines when the differential lock is
applied.
22 Indicator for main beams
The indicator shines when the main beams are
switched on.
23 Glow plug indicator
The indicator goes out when the heating is ready.
24 Light switch
The headlights are turned on, and the change-over
between dipped and main beams is made with
the switch. The indicator shines when the dipped
beams are switched on.
25 Working light switch, sides
The working lights on the sides are turned on with
the switch. The indicator shines when the lighting
is turned on.
26 Working light switch, rear
The working light on the rear is turned on with the
switch. The indicator shines when the lighting is
turned on.
27 Warning light for oil pressure in the
engine
The warning light goes out when the engine starts.
When the oil pressure drops below 0.5 bar, the
warning light shines. You must then immediately
stop the engine, investigate the cause and remedy
the fault before starting the engine again.
28 Charging indicator
The indicator must be extinguished during nor-
mal running. If the indicator shines, there is some
electrical fault, which must be investigated and
remedied.