Tescom TEOS Series - Page 55

18
 14: reserved
Interface
Setting
reserved
 15: Inverter voltage calibration
Interface
Setting
Parameter 2: you may choose Add or Sub to calibrate inverter
voltage
Parameter 3: The voltage setting range is from 0V to 6.4V. The
default value is 0V.
 16: Floating charging voltage adjustment
Interface
Setting
Parameter 2: you may choose Add or Sub to adjust floating
charging voltage.
Parameter 3: the voltage range is from 0V to 6.4V, the default
value is 0V.
 17: Constant charging voltage adjustment
Interface
Setting
Parameter 2: you may choose Add or Sub to adjust constant
charging voltage.
Parameter 3: the voltage range is from 0V to 3.2V, the default
value is 0V.
 18: Maximum charging current setting
Interface
Setting
Parameter 3:
The maximum charging current could be adjusted.
Default value is 4A for long run model and 1A for standard model.
The available options are 1A, 2A and 4A.