Tesla X User Manual

3. If the seat belt retained child safety seat
has an upper tether, attach it to the back
of the seat (see Attaching Upper Tether
Straps on page 28).
Installing LATCH Child Seats
Lower LATCH anchors are provided in the
second row outboard seats and in both rear
row seats. The anchors are located between
the seat's back rest and rear cushion. The
exact location of each anchor is
identified by a
child safety seat identification button,
illustrated below. The button is located on the
seat back, directly above its associated
anchor.
In the second row, install LATCH child safety
seats in the outboard seating positions only.
Use only a seat belt retained seat in the center
position.
Note: If Model X is equipped with two seats in
the second row, both seats support the use of
LATCH child safety seats.
In the third row (if equipped), you can install
LATCH child safety seats in both seating
locations.
To install a LATCH child safety seat, slide the
safety seat latches onto the anchor bars until
they click into place. Carefully read and follow
the instructions provided by the child safety
seat manufacturer.
Child Safety Seats
Seating and Safety Restraints 27

Tesla X Specifications

General

Brand	Tesla
Model	X
Category	Automobile
Language	English