EasyManuals Logo

Tesla X User Manual

Tesla X
194 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #70 background imageLoading...
Page #70 background image
Smart Air Suspension does not make
automatic height adjustments based on
saved location-based settings.
Side collision warnings are active but
automatic steering interventions are
disabled.
In addition, the braking force provided by
Automatic Emergency Braking (see Collision
Avoidance Assist on page 95) is
significantly
limited.
Note: In situations where Model X detects a
heavy load, it assumes that a trailer is
connected and automatically engages Trailer
Mode. A message displays on the instrument
panel informing you that Trailer Mode has
been engaged. When Trailer Mode is entered
automatically due to detection of a heavy
load, you can change the Trailer Mode setting
only by stopping Model X and engaging the
Park gear, or engaging the Neutral gear and
manually applying the parking brake using the
touchscreen (Controls > Driving > E-Brake &
Power
O > Parking Brake).
Warning: Do not rely on Model X to
detect the trailer and automatically
engage Trailer Mode. Always check that
Trailer Mode is engaged before towing a
trailer.
Warning: Under no circumstances should
you exit Trailer Mode when towing a
trailer. Doing so can cause serious injury
and/or death.
Warning: Do not use the air suspension
setting to appropriately match the height
of the hitch with the height of the trailer.
You must choose a trailer hitch and trailer
that have the appropriate height for
suitable axle loading and trailer balance.
Warning: Do not use Trailer Mode when
attaching a bicycle carrier to the trailer
hitch (see Using a Bicycle Carrier on page
73).
Trailer Brakes
When towing a loaded trailer that weighs
more than 1000 lbs (450 kg), Tesla
recommends that the trailer be equipped with
its own brake system adequate for the weight
of the trailer. Ensure compliance with local
regulations.
Follow these steps to connect a brake
controller:
1. Connect the wiring on the brake controller
to the appropriate locations on the 4-pin
pigtail connector included with your
Model X.
1 - Brake control output to trailer
2 - Ground
3 - Brake On Signal
4 - 12V Power (20A)
2. Remove the cover located under the
dashboard in the driver's side foot well.
Towing a Trailer
68 Model X Owner's Manual

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tesla X and is the answer not in the manual?

Tesla X Specifications

General IconGeneral
BrandTesla
ModelX
CategoryAutomobile
LanguageEnglish

Related product manuals