Once installed, test the security of the
installation before seating a child. Attempt to
twist the child safety seat from side to side
and try to pull it away from the seat, then
check that the anchors are still securely in
place.
Attaching Upper Tether Straps
If an upper tether strap is provided, attach its
hook to the anchor point located on the back
of the second and third row seats.
In the outside seating positions, always
position single-strap tethers to run to the side
of the head restraints. In doing so, run it on
the same side of the head restraint as the seat
belt retraction mechanism. In the center
seating seating position on the second row
seats (if equipped), position a single-strap
tether over the top of the head restraint. For
dual-strap tethers, position a strap on each
side of the head restraint. Tighten according
to the child safety seat manufacturer’s
instructions.
Note: To prevent the single-strap tether in the
center position from moving side to side, the
top of the head restraint deforms.
Note: If Model X is equipped with the optional
six seat interior, a center seating position is
not available in the second row.
Single Strap - Second Row Seats:
Child Safety Seats
28 Model X Owner's Manual
To Next Page
Loading...
Need help?
General
