TESTO 110 User Manual

7 Using the product
13
Function
Setting options/comments
MENU/ENTER
Open configuration mode
Start continuous measurement /
record multi-point readings
(Operation also possible directly on
measuring instrument if it is connected
to the app)
In configuration mode:
Confirm input
Print (long press)
Output readings via external printer
Arrow right
In configuration mode:
Increase value, select option
Opening configuration mode

The instrument is switched on and is in the measurement view.
1
Press MENU/ENTER until the display changes.

The instrument is now in configuration mode.

Press MENU/ENTER to switch to the next function. You can leave
configuration mode at any time. To do this, press MODE/END until the
instrument has changed to the measurement view. Any changes that
have already been made in configuration mode will be saved.
Setting the unit

Configuration mode is open, “UNITS” is displayed.
1
Press ◄ / ► to choose between metric (“METR”) and imperial
(“IMPER”) units of measurement and confirm with MENU/ENTER.

The currently set unit flashes.
2
Press ◄ / ► to set the required unit and confirm with MENU/ENTER.

TESTO 110 Specifications

General

Type	-
Purpose	Pocket
Placement	Hand
Display type	Digital
Product color	Black, Silver
Housing material	Acrylonitrile butadiene styrene (ABS)
Accuracy	0.2 °C
Temperature measurement range	-50 - 150 °C
Temperature measurement units	°C
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Power source	Battery
Battery voltage	9 V
Number of batteries supported	1

Weight and Dimensions

Depth	40 mm
Width	64 mm
Height	182 mm
Weight	171 g