TESTO 110 User Manual

3 Product-specific information
5
Product-specific information
 Do not carry out measurements on live components.
 Do not expose handles and feed lines to temperatures in excess of 70°C
unless they are expressly approved for higher temperatures. Temperature
specifications on probes/sensors refer only to the measuring range of the
sensor system.
 Only open the measuring instrument if this is expressly described in the
documentation for the purposes of maintenance or servicing.
Intended use
The testo 110 is a compact measuring instrument for measuring temperatures.
The product is designed for the following tasks/areas:
 Food sector
 Laboratory sector
The product should not be used in the following areas:
 In potentially explosive atmospheres
 For diagnostic measurements in the medical field
The following product components are designed for continuous contact
with foodstuffs in accordance with Regulation (EC) 1935/2004:
from the tip of the measuring probe up to 1 cm before the probe handle
or the plastic housing. If provided, the information about penetration
depths in the instruction manual or the mark(s) on the measuring probe
should be noted.

TESTO 110 Specifications

General

Type	-
Purpose	Pocket
Placement	Hand
Display type	Digital
Product color	Black, Silver
Housing material	Acrylonitrile butadiene styrene (ABS)
Accuracy	0.2 °C
Temperature measurement range	-50 - 150 °C
Temperature measurement units	°C
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Power source	Battery
Battery voltage	9 V
Number of batteries supported	1

Weight and Dimensions

Depth	40 mm
Width	64 mm
Height	182 mm
Weight	171 g