TESTO 110 User Manual

7 Using the product
15
Measuring

The instrument is switched on and is in the measurement view.
1
Put the probe into position and take the readings.
With the alarm function on and if the alarm threshold is exceeded or
undershot:
 Alarm icon flashes and a signal tone is emitted until any key is
pressed.
Freezing a reading, displaying the
maximum/minimum value
The current reading can be frozen. The maximum and minimum values since
the last time the instrument was switched on in the standard view or during a
multi-point or continuous measurement can be displayed.
1
Press ◄ several times until the desired value is displayed.

The following are displayed in turn:
o Hold: frozen measured value
o Max: Maximum value
o Min: Minimum value
o Current measuring value
Resetting maximum/minimum values
The maximum/minimum values of all channels can be reset to the current
reading.
1
Press ◄ several times until Max or Min lights up.
2
Hold down ◄ (approx. 2 s).

All maximum and minimum values are reset to the current reading.

TESTO 110 Specifications

General

Type	-
Purpose	Pocket
Placement	Hand
Display type	Digital
Product color	Black, Silver
Housing material	Acrylonitrile butadiene styrene (ABS)
Accuracy	0.2 °C
Temperature measurement range	-50 - 150 °C
Temperature measurement units	°C
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Power source	Battery
Battery voltage	9 V
Number of batteries supported	1

Weight and Dimensions

Depth	40 mm
Width	64 mm
Height	182 mm
Weight	171 g