TESTO 184 User Manual

4 Product description
14
4.2. Display (LCD)
Not available for all product versions.
1 Measurement program running
2 Measurement program finished
3 Wait for start of measurement program
4 Highest saved reading
5 Lowest saved reading
6 Reading
7 Status information: start criterion Date/time programmed/time
mark, xyz measurement axes for acceleration measurement,
Alarm set limit value(s) exceeded, set limit value(s) not
exceeded
8 Units
9 Battery capacity: sufficient, part empty, low,
(flashing) empty
10 Lower limit value exceeded
11 Upper limit value exceeded
For technical reasons, the display speed of liquid crystal
displays becomes slower at temperatures below 0 °C
(approx. 2 seconds at -10 °C, approx. 6 seconds at -20 °C).
This has no influence on the measuring accuracy.
For technical reasons, battery performance decreases at
lower temperatures. This has no influence on the
measuring accuracy. We recommend the use of fully

TESTO 184 Specifications

General

Temperature accuracy	±0.5 °C
Resolution temperature	0.1 °C
Humidity measuring range	0 to 100 %RH
Humidity accuracy	±3 %RH
Resolution humidity	0.1 %RH
Measuring rate	1 min to 24 h
Protection class	IP67
Battery life	Approx. 2 years