6 Maintaining the product
24
7. Reconfigure the data logger, see the section Configuring the
data logger.
For verification of battery performance, we only used
batteries from EVE and Panasonic. This is why we
recommend using batteries from these manufacturers in
our testo 184 product.
6.2. Cleaning the instrument
CAUTION
Damage to the sensor!
> Ensure that no liquid enters the inside of the housing.
> If the housing of the instrument is dirty, clean it with a damp
cloth.
Do not use any aggressive cleaning agents or solvents! Weak
household cleaning agents or soap suds can be used.
To Next Page
Loading...
