TESTO 327 - Activating functions and fuel

Using the product 13
➣
Aligning the flue gas probe:
The flue gas must be able to flow freely past the thermocouple.
❯ Align the probe by turning it as required.
The tip of the probe must be in the centre of the flue gas flow.
❯ Align the flue gas probe in the flue gas duct
so that the tip is in the centre of the flow
(area of the highest flue gas temperature).
Activating the required functions
➣
Switching the instrument on:
❯ Press .
➣
Activating fuel:
1 Press .
2 Select Fuel using / and confirm entry with the OK function key.
3 Select the fuel to be measured using / and confirm entry with the
OK function key.
deenfresitptsvnl????