TESTO 327 - Data management (327-2); Checking the instrument; Instrument diagnosis

Using the product18
➣
Saving readings (327-2 only):
The Save function key is only available if saving is possible in the
instrument's current status.
❯ Start saving with the Save function key.
➣
Printing/deleting/displaying measurement data (327-2 only):
There are 20 memory locations (Position 1 to Position 20) to which one
measurement data record can be saved per location. Memory locations
that have already been assigned are indicated by the display of the
date/time of saving.
1 Press .
2 Select Memory using / .
- The memory capacity and available memory locations are displayed.
❯ To print the memory: press the Print function key.
❯ To delete the whole memory: press the Del function key and confirm entry
with the Yes function key.
3 Press OK.
4 Select memory location using / .
❯ To display the measurement data record: press the Value function key.
❯ To print the measurement data record: press the Print function key.
❯ To delete the measurement data record: press the Del function.
➣
Transfer data to a Pocket PC (327-2 only):
Data can be transferred to a Pocket PC via infrared or Bluetooth.
You must also refer to the documentation that comes with the software.
It is not possible to transfer data to a Pocket PC and simultaneously print.
For Bluetooth transfer, the Bluetooth interface must be activated first.
Checking the instrument
➣
Performing an instrument diagnosis:
1 Press .
2 Select Diagnosis using / and confirm entry with the OK function key.
3 Select the required function using / and confirm entry with the OK
function key.