Battery type
To ensure that the battery capacity is displayed correctly, the battery type used
must be set.
²
Setting tthe bbattery ttype:
The configuration menu is open, config. is displayed.
1 Device ¬¬Bat-type ¬ .
2 Press / Battery or ReBa and confirm with .
Auto OFF
If Auto OFF is switched on, the instrument switches itself off automatically after
10min if no button is pressed. Exception: Cyclical printing (instruments without
a memory) or a measuring program (instruments with a memory) is active.
²
Switching AAuto OOFF oon/off:
The configuration menu is open, config. is displayed.
1 Device ¬¬Auto OFF ¬ .
2 Press / to select On or Off and confirm with .
Reset
When a reset is carried out, the instrument is reset to the default settings, all
settings/data are deleted. Exception: Language, Date/Time.
²
Resetting:
The configuration menu is open, config. is displayed.
1 Device ¬¬reset ¬ .
2 Reset with or cancel the reset with .
Te-Type
The probe characteristic curves stored in the instrument can be set for the
probe type used.
²
Setting pprobe ttype:
The configuration menu is open, Config. is displayed.
1 Probe ¬¬Te-Type ¬ .
2 Select the desired probe type with / and confirm with .
OK
OKOK
ESCOK
OKOK
OK
OKOK
OK
OKOK
6. Setting the instrument46
To Next Page
Loading...
Need help?
General
