6. Setting the instrument50
Menu overview testo 435-2/-4
Profile menu items Function
Standard Memory Activate/set measurement locality, print report, delete store
Meas. Prog Set/ de/activate measurement program
Mean Time/point mean calculation
Calc. Calculate volume flow, de/activate differential temperature;
435-3 additionally; De/activate flow calculation
P = 0 (nur 435-4) Zero internal pressure sensor
Parameter Set reference pressure, Set area form/cross-section
435-4 additionally; Set reference temperature/humidity.
Ductm. P = 0 (nur 435-4) Zero internal pressure sensor
Memory Activate/set measurement locality, print report, delete store
Velocity (nur 435-4) De/activate flow calculation
Vol. De/activate volume flow calculation
Parameter Set reference pressure, Set area form/cross-section
435-4 additionally; Set reference temperature/humidity.
IAQ Mean Time mean calculation
Pres. Set reference pressure
Memory Activate/set measurement locality, print report, delete store
P = 0 (nur 435-4) Zero internal pressure sensor
²
Opening tthe mmain mmenu:
The instrument is in measurement view.
i Press .
- Menu is displayed.
Press to go one menu level back. To leave the main menu, press
several times until the instrument changes to measurement view.
6.2.1 Memory (435-2/-4 only)
Location
The active location can be changed. Up to 99 locations can be created. The
numerical location designations (01-99) can be changed into any text (max.
10 characters) using the PC software.
²
Changing aan aactive llocation:
The main menu is open, Menu is displayed.
1 Memory ¬¬Location ¬ .
2 Press / to select the location to be activated and confirm with
.
OK
OKOK
ESC
ESC
To Next Page
Loading...
Need help?
General
