4
Warning
PLEASE READ THIS WARNING BEFORE OPERATION
Please observe the max. storage and transport tempera-
tures and the max. operating temperature (e.g. protect
the instrument from direct sunlight.)
Switch off the measurement instrument when making
configuration changes (e.g. changing the filter)
because the parameters specific to the probe are
only read by the instrument when it is first swit-
ched on.
Take care when opening the instrument because
improper handling or use of force cancel your
waranty rights.
Caution: High voltage
A voltage >1000 volt can occur.
Do not open handle if the hand-held instrument is
connected to the flash tubes.
Do not use instruments with a damaged hand-
le.
To Next Page
Loading...
