6 First steps
14
6.2 Inserting batteries
The exchangeable batteries are the backup power to continue working
with the device when the integrated lithium battery is empty, e. g. for
long-term measurements.
The instrument is switched off.
Fold out the suspension hook,
release the clip and remove the
battery compartment lid.
Insert the batteries (scope of delivery, 3 x 1.5V, type AA Alkaline) into
the battery compartment. Observe the polarity!
Attach and close the battery compartment lid (the clip must click into
place).
Switch the instrument on.
When not in use for a long period: Take out the batteries.
To Next Page
Loading...
