Click on Transfer data to DataControl and delete from instrument.
Data has been successfully transferred.
9 Maintenance
9.1 Calibration
The testo 570s is supplied with a factory calibration certificate as
standard.
Recalibration once every 12 months is recommended in many
applications.
This can be carried out by Testo Industrial Services (TIS) or other
certified service providers.
Please contact Testo for further information.
9.2 Cleaning the instrument
Do not use any aggressive cleaning agents or solvents! Mild household
cleaning agents and soap suds may be used.
If the housing of the instrument is dirty, clean it with a damp cloth.
To Next Page
Loading...
