The measurement result is
displayed.
Press [Menu/Enter] to return to the main menu.
7.3 Performing long time measurement
With its integrated logging function the device can be left on the system and
logging can be done without being on site.
This allows an intelligent error analysis in the testo Smart App.
The logging is possible for following applications:
• Refrigeration
• Evacuation
• Pressure leak test
• Compressor test
The logging can only be started, stopped and saved from the connected
testo Smart App.
When a long term measurement is done with the testo 770-3 Clamp
Meter, the battery status of the testo 770-3 can´t be shown or
considered in the testo 570s. The technician has to make sure, that the
testo 770-3 has enough battery capacity for the planned logging time.
To Next Page
Loading...
