9 Maintenance
87
9.3 Keeping connections clean
Keep screw connections clean and free of grease and other deposits;
clean with a damp cloth as required.
9.4 Removing oil residues
Carefully blow out oil residues in the valve block using compressed
air.
9.5 Ensuring measuring accuracy
Testo Customer Service will be happy to help you as required.
Check the instrument regularly for leaks. Keep to the permissible
pressure range!
Calibrate the instrument regularly (recommendation: once a year).
9.6 Changing batteries batteries
The instrument is switched off.
Fold out the suspension hook,
release the clip and remove the
battery compartment lid.
Remove the spent batteries and insert new ones (3 x AA alkaline) into
the battery compartment. Observe the polarity!
Attach and close the battery compartment lid (the clip must click into
place).
Switch the instrument on.