TESTO 570 Series - Page 28

7 Using the product
28
2
Press [▲] / [▼] to select Measuring
Mode and press [Menu/Enter] to
confirm.

The Measuring Mode menu is
displayed.
3
Press [▲] / [▼] to select Target Superheat and press [Menu/Enter]
to confirm.

The Configure Target Superheat
menu is displayed.
The values can either be configured manually via Manual Input or
recorded by the testo 605i via Smart Probe. When a Smart Probe is
selected, available testo 605i instruments are displayed for the
connection.
4
Adjust values for Outdoor Dry Bulb Temp.
4.1
Press the [▲] key and in the Outdoor Dry Bulb Temp. field, select
Manual Input.