TESTO 570 Series - Page 73

8 Smart App
73
connected, you may also perform the tightness test without temperature
compensation.
Surface temperature probes (e.g. testo 115i) can also be used for the
temperature-compensated leakage test, but must not be used for
measuring surface temperature. They must be positioned as far as
possible to measure the air temperature.
The 550i, 550s, 557s or 570s manifold is used to perform the
measurement.
1
Click on Measure.
2
Click on Leakage test.

The Leakage test measurement menu opens.
3
Click on .

Configuration menu opens.
4
Make the required settings.
5
Click on Apply Configuration.