TESTO 645 - Timed Mean Calculation

55.20
00:15
1:
GO
MEAN
M.05
MAN
N.0017
m/s
1:
END
MEAN
M.05
MAN
N.0017
m/s
00:10

13
2. Measurement functions
Timed mean calculation Mean 
Only for parameter in the 1st line
55.21
00:05
MEAN
MEAN NEW
M.05
MAN
N.0017
m/s


Timed duration of
mean calculation
Mean
Select required reading.
Start timed mean calculation
Finish timed mean calculation.
Continue timed mean calculation
or
calculate mean.
Save mean.
Print mean.
New mean
calculation possible
or
Hold
Max/Min
Mean
Current measurement
58.06
21.80
1:
1:
M.05
MAN
N.0017
m/s
hPa
Hold
Max/Min
Mean
Hold
Max/Min
Mean
Hold
Max/Min
Mean
Hold
Max/Min
Mean
55.21
00:00
1:
START
M.05
MAN
N.0017
m/s

Note on saved or printed logs:
1. The log of a multi-point mean
calculation contains single value,
max. value, min. value and
mean value.
2. The log of a timed mean
calculation contains max.
value, min. value and mean
value.
Special solution for volume
flow selected:
3. Any additional velocity values
(m/s) are saved with the volume
flow values in the memory.
ESC
Location
55.17
1.888.610.7664 info@Testo-Direct.com
www.Testo-Direct.com