TESTO 645 - Page 37

Ordering data
Fühler für testo 645 / 445
37
NiCr-Ni probes
Meas. range / Accuracy t
99
sec.
Connection Part no.
Quick-action surface probe with sprung thermocouple strip -200...+300°C, Short-
term up to +500 °C,
Class 2
3 Plug-in head
(
Please order connection
cable 0430.0143)
0604 0194
Spare measuring head for pipe clamp probe, for pipes with
a 2"diameter
-60...+130°C, Class 2 5 1,5 m, PVC 0602 0092
Rapid response immersion/penetration probe -200...+400°C, Class 1 3 Plug-in head
(
Please order connection
cable 0430.0143)
0604.0293
Quick action immersion/penetration probe for measure-
ments in liquids
-200...+600°C, Class 1 1 Plug-in head
(
Please order connection
cable 0430.0143)
0604.0493
Quick action immersion/penetration probe for high tem-
peratures
-200...+1100°C, Class 1 1 Plug-in head
(
Please order connection
cable 0430.0143)
0604.0593
Quick action immersion/penetration probe for measure-
ments in gases and liquids with a slim tip, low in mass
-200...+600°C, Class 1 <1 Plug-in head
(
Please order connection
cable 0430.0143)
0604.9794
Plug-in measuring tips Ø 3 ffor high temperatures, benda-
ble
a) Stainless steel outer coating 1.4541 L 750
b) Stainless steel outer coating 1.4541 L 1200
c) Inconel outer coating 2.4816 L 550
d) Inconel outer coating 2.4816 L 1030
-200..+900 °C
-200..+900 °C
-200..+1100 °C
-200..+1100 °C
3,5
3,5
3,5
3,5
0600.5393
0600.5493
0600.5793
0600.5893
Handle for plug-in measuring tips coiled cable
PUR
0600 5593
Accessories for NiCr-Ni probes
Adapter to connect NiCr-Ni thermocouples and probes with
open wire ends
0.3 m, PVC 0600.1693
Silicone heat paste (14g), Tmax = +260 °C to improve heat
transfer in surface probes
0554.0004
Connection cable for probes Length 1,5 m,
PUR
0430.0143
Connection cable for probes with plug-in head Length 5,0 m,
PUR
0430.0145
Extension cable between plug-in cable and instrument Length 5,0 m,
PUR
0409.0063
1.888.610.7664 info@Testo-Direct.com
www.Testo-Direct.com